Kereta rel listrik

Kereta Liverpool Overhead Railway, dipajang di Museum Liverpool

Purwarupa KRL JNR 201 di Stasiun Harajuku, Tokyo, 13 Mei 1979. Bersebelahan dengannya adalah KRL seri 103 Jalur Yamanote melintas langsung

Kereta rel listrik (KRL) adalah jenis kereta rel yang ditenagai oleh listrik. Karena KRL tidak memerlukan lokomotif, motor traksi akan dipasang pada salah satu beberapa keretanya dalam satu rangkaian. KRL teridiri atas dua atau lebih kereta yang dirangkai secara semipermanen, tetapi dapat juga berupa unit tunggal. Mayoritas operasinya adalah untuk penumpang, khususnya untuk para penglaju, tetapi ada juga yang dijadikan sebagai kereta pos.

KRL cukup populer untuk armada komuter dan perkotaan karena perlajuannya cepat dan bebas polusi. Bahkan KRL juga kurang bising daripada kereta rel diesel atau kereta api lokomotif. KRL dapat beroperasi pada malam hari tanpa mengganggu tidur para warga pinggiran rel. Tambahannya, desain terowongan untuk KRD cukup sederhana karena tidak perlu lagi lubang angin untuk mengeluarkan asap, meski ada beberapa yang harus didesain ulang untuk mengakomodasi peralatan kelistrikannya.

Sejarah

Multiple unit train control was first used in the 1890s.

The Liverpool Overhead Railway opened in 1893 with two car electric multiple units, controllers in cabs at both ends directly controlling the traction current to motors on both cars.

The multiple unit traction control system was developed by Frank Sprague and first applied and tested on the South Side Elevated Railroad (now part of the Chicago 'L') in 1897. In 1895, derived from his company's invention and production of direct current elevator control systems, Frank Sprague invented a multiple unit controller for electric train operation. This accelerated the construction of electric traction railways and trolley systems worldwide. Each car of the train has its own traction motors: by means of motor control relays in each car energized by train-line wires from the front car all of the traction motors in the train are controlled in unison.

Jenis

The cars that form a complete EMU set can usually be separated by function into four types: power car, motor car, driving car, and trailer car. Each car can have more than one function, such as a motor-driving car or power-driving car.

• A power car carries the necessary equipment to draw power from the electrified infrastructure, such as pickup shoes for third rail systems and pantographs for overhead systems, and transformers.
• Motor cars carry the traction motors to move the train, and are often combined with the power car to avoid high-voltage inter-car connections.
• Driving cars are similar to a cab car, containing a driver's cab for controlling the train. An EMU will usually have two driving cars at its outer ends.
• Trailer cars are any cars (sometimes semi-permanently coupled) that carry little or no traction or power related equipment, and are similar to passenger cars in a locomotive-hauled train.

On third rail systems, the outer vehicles usually carry the pick up shoes with the motor vehicles receiving the current via intra-unit connections.

Many modern 2-car EMU sets are set up as twin or "married pair" units. While both units in a married pair are typically driving motors, the ancillary equipment (air compressor and tanks, batteries and charging equipment, traction power and control equipment, etc.) are shared between the two cars in the set. Since neither car can operate without its "partner", such sets are permanently coupled and can only be split at maintenance facilities. Advantages of married pair units include weight and cost savings over single-unit cars (due to halving the ancillary equipment required per set) while allowing all cars to be powered, unlike a motor-trailer combination. Each car has only one control cab, located at the outer end of the pair, saving space and expense over a cab at both ends of each car. Disadvantages include a loss of operational flexibility, as trains must be multiples of two cars, and a failure on a single car could force removing both it and its partner from service.

As high speed trains

Some of the more famous electric multiple units in the world are high-speed trains: the Italian Pendolino and Frecciarossa 1000, Shinkansen in Japan, the China Railway High-speed in China, ICE 3 in Germany, and the British Rail class 395 Javelin. The retired New York–Washington Metroliner service, first operated by the Pennsylvania Railroad and later by Amtrak, also featured high-speed electric multiple-unit cars, known as the Budd Metroliner.

Fuel cell development

EMUs powered by fuel cells are under development. If successful, this would avoid the need for an overhead line or third rail. An example is Alstom’s hydrogen-powered Coradia iLint. The term hydrail has been coined for hydrogen-powered rail vehicles.

Battery electric multiple unit

Many battery electric multiple units are in operation around the world, with the take up being strong. Many are bi-modal taking energy from onboard battery banks and line pickups such as overhead wires or third rail. In most cases the batteries are charged via the electric pickup when operating on electric mode.

Perbandingan dengan lokomotif

EMUs, when compared with electric locomotives, offer:

• Higher acceleration, since there are more motors sharing the same load, more motors allows for a higher total motor power output
• Braking, including Eddy current, rheostatic and/or regenerative braking on multiple axles at once, greatly reducing wear on brake parts (as the wear can be distributed among more brakes) and allowing for faster braking (lower/reduced braking distances)
• Reduced axle loads, since the need for a heavy locomotive is eliminated; this in turn allows for simpler and cheaper structures that use less material (like bridges and viaducts) and lower structure maintenance costs
• Reduced ground vibrations, due to the above
• Lower adhesion coefficients for driving (powered) axles, due to lower weight on these axles; weight is not concentrated on a locomotive
• A higher degree of redundancy - performance is only minimally affected following the failure of a single motor or brake
• Higher seating capacity, since there is no locomotive; all cars can contain seats.

Electric locomotives, when compared to EMUs, offer:

• Less electrical equipment per train resulting in lower train manufacturing and maintenance costs
• Easily allows for lower noise and vibration in passenger cars, since there are no motors or gearboxes on the bogies below the cars

Lihat pula

• Kereta rel diesel
• Kereta rel elektrodiesel
• Kereta rel baterai